相關標志的支撐結構應、美觀、耐用。考慮到當地風速、板面尺寸、路邊條件、標志效果等因素，不同燃氣標志樁分別采用懸掛式、柱式、懸臂式、門架式等支撐方式。除螺栓、螺母、墊圈等緊固件鍍鋅350g/m2外，其他桿件鍍鋅600g/m。

The supporting structure of relevant signs shall be safe, beautiful and durable. Considering the local wind speed, slab size, roadside conditions, sign effect and other factors, different gas sign piles adopt suspension, column, cantilever, gantry and other support methods respectively. In addition to bolts, nuts, washers and other fasteners galvanized 350g/m2, other rods galvanized 600g/m.

根據圖紙要求，制作柱、布局、柱選擇標準鋼管，焊接規劃長度不足，切割鋁板。在已粘貼底膜的鋁板上，根據規劃要求，將用反光膜雕刻的文字粘貼在鋁板上。要求文字規則，外觀干凈，無氣泡和皺紋。檢查。將已粘貼的文字的標志布局與圖紙進行比較，并與圖紙完全照顧。

According to the requirements of the drawing, make the column, layout, and select the standard steel pipe for the column. If the planned length of welding is insufficient, cut the aluminum plate. On the aluminum plate with the bottom film pasted, according to the planning requirements, the words engraved with the reflective film are pasted on the aluminum plate. The text shall be regular, the appearance shall be clean, and there shall be no bubbles and wrinkles. Check. Compare the logo layout of the pasted text with the drawing and take full care of it.

燃氣標志樁相關標志制造商的標志顏色由背景顏色、圖形或字符顏色、框架顏色和襯里顏色組成，標志的整體結構由標志底板、滑槽和鋼筋、標志表面、支撐、緊固件和標志組成。相關標志以鋁板（1.2-3mm厚）為基礎，壓力（或折疊）后在其表面粘貼反射膜，然后用絲網印刷或計算機切割膜制作圖案，背面安裝鋁槽，用箍固定在柱上。反射材料主要采用鉆石、強、工程反射膜等五級反射膜。

The logo color of the manufacturer of the relevant signs of the gas sign pile is composed of the background color, graphic or character color, frame color and lining color. The overall structure of the sign is composed of the sign base plate, chute and reinforcement, sign surface, support, fasteners and signs. Relevant signs are based on aluminum plates (1.2-3mm thick). After pressure (or folding), the reflective film is pasted on its surface, and then the pattern is made by screen printing or computer cutting film. Aluminum slots are installed on the back and fixed on the column with hoops. The reflective material mainly adopts diamond, strong, engineering reflective film and other five level reflective films.

施工時要注意的事項也很多，比如：機械設備到達現場后，應設置相關標志、路欄等設備，管理好路人和相關，嚴格按照實際操作標準施工。為了更好地保證現場工作人員的，盡可能避免事故，確保施工。嚴格按照工程圖紙的規定和相關流量的行駛方向測量標志的設定部位。

There are also many matters to be paid attention to during construction, such as: after the mechanical equipment arrives at the site, relevant signs, barriers and other safety equipment should be set up, passers-by and related personnel should be well managed, and the construction should be carried out in strict accordance with the actual operation standards. In order to better ensure the safety of on-site staff, try to avoid safety accidents and ensure safe construction. The setting position of the sign shall be measured in strict accordance with the provisions of the engineering drawing and the driving direction of the relevant flow.

標志樁基本測量后，考慮工程圖紙上設置的地址，并按規定后立模板。扎建筑鋼筋。澆筑混凝土澆筑混凝土、地腳螺釘和基礎法蘭部分合適，達到設計標高要求。標志支撐點結構的施工應在規定基礎混凝土強度并經工程師批準后進行。支柱法蘭和混凝土基礎法蘭應標準。密封性能，地腳螺釘相互配合，擰緊地腳螺栓后，支柱不得歪斜。

After the basic measurement of the sign pile, the address set on the engineering drawing shall be considered, and the formwork shall be erected after it is solved according to the regulations. Tie building reinforcement. Pouring concrete pouring concrete, foundation screws and foundation flange parts are appropriate to meet the design elevation requirements. The construction of sign support point structure shall be carried out after the foundation concrete strength is specified and approved by the engineer. Pillar flanges and concrete foundation flanges shall be standard. Sealing performance. The foundation screws are safe to cooperate with each other. After tightening the foundation bolts, the pillars shall not be tilted.

以上就是問題解答的相關內容了，希望能夠幫助到大家，如對這一問題還存在任何疑問，都歡迎關注我們網站http://www.gcshome.cn并咨詢我們的工作人員，將竭誠為您服務。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.gcshome.cn And consult our staff, will serve you wholeheartedly.